![HARDENED STEEL NOZZLE](http://www.phaetus.com/cdn/shop/files/HARDENEDSTEELNOZZLE.png?v=1686211097&width=1445)
![HARDENED STEEL NOZZLE](http://www.phaetus.com/cdn/shop/files/1_58c342d4-cece-4df8-a509-36b7dfa15b02.png?v=1686213953&width=1445)
![HARDENED STEEL NOZZLE](http://www.phaetus.com/cdn/shop/files/2_0008364e-0955-4e3c-9a87-10e8ac1b2acc.png?v=1686213952&width=1445)
![HARDENED STEEL NOZZLE](http://www.phaetus.com/cdn/shop/files/3_28a60d3b-c1c3-4230-af5b-15e079d8d497.png?v=1686213953&width=1445)
![HARDENED STEEL NOZZLE](http://www.phaetus.com/cdn/shop/files/4_367dcdc0-a075-4af7-bf72-693eb28de1aa.png?v=1686213953&width=1445)
![HARDENED STEEL NOZZLE](http://www.phaetus.com/cdn/shop/files/5_3d0efb4a-2e7c-4866-8381-2c80a3aed8bc.png?v=1686213953&width=1445)
-
7.8
Hardness (Mohs)
-
450℃
Maximum Printing Temperature
-
22W/m·k
Thermal Conductivity
-
8μm/m·℃
Expansion Coefficient
Adaptation Models
1100-PS-HS
1200-PS-HS
1110-PH-HS
175:Φ0.10/Φ0.15/Φ0.20/Φ0.25/Φ0.30/Φ0.35/Φ0.40/Φ0.50/Φ0.60/Φ0.80/Φ1.00
300:Φ0.10/Φ0.15/Φ0.20/Φ0.25/Φ0.30/Φ0.35/Φ0.40/Φ0.50/Φ0.60/Φ0.80/Φ1.00
Performance Analysis
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.High quality imported die steel material ensures the stability of performance.
Applicable Filament
Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
Product Features
-
φ0.1
Min. Orifice Diameter
-
±0.01mm
Tolerance
-
≤Ra0.4μm
Inner Hole Roughness
-
≤0.02mm
Concentricity