Hardened Steel Nozzle
(Nickel Plated)

 
7.8

Hardness (Mohs)


450

Maximum Printing Temperature


22W/m·k

Thermal Conductivity


8μm/m·℃

Expansion Coefficient



 
 
缺文案
Hardness over HRC60 makes a tiny wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
The whole nozzle is applied with WS2 nano-coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.03 which makes the nozzle with clean printing, without plastic sticking to it.
Unique passageway in the nozzle improves the flow rate at the inner hole faster.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Superior quality imported tool steel material ensures the stability of performance.

1100/PHS2 RepRap M6
1002/PHS2 MK8
1026/PHS2 MK10
1025/PHS2 MK10 PTFE
1110/PHS2 RepRap M6 Plus
175:Φ0.25/Φ0.30/Φ0.35/Φ0.40/Φ0.50/Φ0.60/Φ0.80/Φ1.00
300:Φ0.25/Φ0.30/Φ0.35/Φ0.40/Φ0.50/Φ0.60/Φ0.80/Φ1.00

Hardness over HRC60 makes a tiny wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
The whole nozzle is applied with WS2 nano-coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.03 which makes the nozzle with clean printing, without plastic sticking to it.
Unique passageway in the nozzle improves the flow rate at the inner hole faster.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Superior quality imported tool steel material ensures the stability of performance.

Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.


Min. Orifice Diameter
φ0.10

Tolerance
±0.01mm

Inner Hole Roughness
≤Ra0.4μm

Concentricity
≤0.02mm