Hardened Steel Nozzle
(Blackened)

 
7.8

Hardness (Mohs)


450

Maximum Printing Temperature


22W/m·k

Thermal Conductivity


8μm/m·℃

Expansion Coefficient



 
 
缺文案
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials;
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK;
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole;
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion;
Min. diameter of hole 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing;
High quality imported die steel material ensures the stability of performance.

1100/PHS RepRap M6
1002/PHS MK8
1026/PHS MK10
1025/PHS MK10 PTFE
1110/PHS RepRap M6 Plus
175:Φ0.10/Φ0.15/Φ0.20/Φ0.25/Φ0.30/Φ0.35/Φ0.40/Φ0.50/Φ0.60/Φ0.80/Φ1.00
300:Φ0.10/Φ0.15/Φ0.20/Φ0.25/Φ0.30/Φ0.35/Φ0.40/Φ0.50/Φ0.60/Φ0.80/Φ1.00

Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.

Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.


Min. Orifice Diameter
φ0.10

Tolerance
±0.01mm

Inner Hole Roughness
≤Ra0.4μm

Concentricity
≤0.02mm