VORON

Product Features

Product Feature

Ultra-High-Speed Printing
The redesigned heater block features an extended heating zone for a volumetric flow rate of up to 36 mm³/s. Cut your print times significantly with the Rapido 2F.

Advanced Thermal Isolation
The EndCoat-coated all-metal heatbreak delivers excellent wear resistance and thermal insulation. It helps prevent heat creep and clogs, keeping filament flowing smoothly even on demanding prints.

Fast, Reliable Heating
The high-efficiency rectangular ceramic heater reaches 280°C in just 39 seconds, so you can start printing sooner.

One-Handed Nozzle Change
Low-thermal-conductivity titanium alloy screws and a rigid structural design make nozzle changes quick and easy with one hand, without risking damage to the hotend.

Easy To Install And Upgrade
A new cable tie structure protects your wiring harness during installation, and the metal-dome fixed heater makes upgrades and maintenance simple and cost-effective.

Replacable PT1000 Sensor
The detachable PT1000 temperature sensor lets you meet the requirements of high-temperature filaments with ease.

Detachable nozzle design
Features swappable PS (V6) nozzles, allowing you to switch between different nozzle materials based on your specific needs.

Product Feature

Version
Phaetus Rapido 2 HF/UHF, temperature sensor 104NT, blue/black, for 1.75 mm filament.

Thermal separation
The heatbreak and heatsink help control heat transfer away from the melt zone. Maintain adequate cooling to support consistent filament feeding.

Ceramic heating unit
Rectangular heater and extended melt zone support efficient melting. Choose the HF or UHF version that suits your toolhead and printing requirements.

Serviceable design
Replaceable 104NT sensor and rigid titanium-alloy support allow maintenance and one-handed nozzle changes. Follow the manufacturer's procedure and specified tightening torque.

Check before fitting
Match the mount, wiring, cooling and controller sensor configuration. Install and calibrate according to the manual; compatibility depends on your printer setup.

Detachable nozzle design
Features swappable PS (V6) nozzles, allowing you to switch between different nozzle materials based on your specific needs.

Product Feature

Version
Phaetus Rapido Plus 2 HF/UHF, temperature sensor PT1000_B, blue/Black, for 1.75mm filament.

Thermal separation
The heatbreak and heatsink help control heat transfer away from the melt zone. Maintain adequate cooling to support consistent filament feeding.

Ceramic heating unit
Rectangular heater and extended melt zone support efficient melting. Choose the HF or UHF version that suits your toolhead and printing requirements.

Serviceable design
Replaceable PT1000_B sensor and rigid titanium-alloy support allow maintenance and one-handed nozzle changes. Follow the manufacturer's procedure and specified tightening torque.

Product Feature

High-performance neXt G Fiber Hotend Engineered for precision, the neXt G Fiber Hotend delivers high flow rates and consistent performance. Designed for demanding 3D printing tasks, it ensures reliable material feeding and excellent print quality.

Universal compatibility with popular printers Fully compatible with Voron, Prusa Mk2, Mk3, and Creality printers. This hotend seamlessly integrates into existing setups, offering a plug-and-play upgrade without modifications.

Includes essential components for immediate use Comes with a complete set: 3Pcs Silicone Sock, Ceramic Heating Kit, Heatblock, Heatbreak G Fiber, Heatbreak neXt G, Heatsink, Thermistor PT1000. All parts are included for direct installation.

Detachable design for easy maintenance Features a detachable V6 nozzle system for quick cleaning and replacement. This design reduces downtime and enhances long-term usability across various printing materials.

Product Feature

High-performance neXt G Hotend Engineered for precision, the neXt G Hotend delivers high flow rates and consistent performance. Designed for demanding 3D printing tasks, it ensures reliable material feeding and excellent print quality.

Universal compatibility with popular printers Fully compatible with Voron, Prusa Mk2, Mk3, and Creality printers. This hotend seamlessly integrates into existing setups, offering a plug-and-play upgrade without modifications.

Includes essential components for immediate use Comes with a complete set: 3Pcs Silicone Sock, Ceramic Heating Kit, Heatblock, Heatbreak G, Heatbreak neXt G, Heatsink, Thermistor PT1000. All parts are included for direct installation.

Detachable design for easy maintenance Features a detachable V6 nozzle system for quick cleaning and replacement. This design reduces downtime and enhances long-term usability across various printing materials.

High-speed and high-torque extrusion greatly improves printing efficiency.

Guardian of Precise Monitoring

RNC Ⅱ Coating Innovation: Ultra-Wear-Resistant Gear Protection

Easy installation, wide compatibility

Product Features

High-Performance Dragonfly BMO Hotend
The Phaetus Dragonfly BMO Hotend is engineered for precision, durability, and reliable performance in demanding 3D printing applications. Its all-metal construction supports high-temperature printing and consistent extrusion when paired with compatible heating and temperature-sensing components.

Compatibility with Multiple 3D Printer Setups
Designed for selected 3D printer configurations, the Dragonfly BMO Hotend can be used with compatible models and setups, including certain Creality Ender 3 series printers, Prusa i3 printers, and Voron 2.4 builds. It can also work with compatible V6-style mounting systems and Titan Bowden extruders, depending on the printer configuration and required adapters. Please verify compatibility before ordering.

Bimetal Heatbreak for Improved Thermal Control
Featuring a BMO bimetal heatbreak, the Dragonfly Hotend is designed to help limit heat creep and maintain a more stable thermal transition between the hot and cold zones. This supports consistent filament feeding and reliable print quality across a range of printing applications.

Multiple Configurations and Accessories
Choose the configuration that best suits your needs, with available options including:BMO Heatblock,BMO Heatbreak Kit,Black Hotend,Blue Hotend,Black Silicone Sock

Detachable nozzle design
Features swappable PS (V6) nozzles, allowing you to switch between different nozzle materials based on your specific needs.

Product Features

No Heat Required – strong adhesion at room temperature.                             

0-Second Removal – flex and release prints instantly.

Warp-Resistant Steel – hardened spring steel keeps the plate flat.

Double-Sided Durability – textured coating built for long-term use.

Arkfly × Phaetus Design – engineered for precision desktop 3D printing.