aeWorthy™ ABS-GF

aeWorthy™ABS-GF is an ABS-based filament specially developed for 3D printing and it is reinforced with 10% glass fiber. Compared with other ABS filaments, it has a much lower odor and excellent dimensional stability.

Color: Beige / Black / Red /Yellow / Orange 

Diameter: 1.75mm / 2.85mm

Net weight: 1kg

Recommended Nozzle:

DLC Hardened Steel Nozzle 1100-HSD

Hardened Steel Nozzle 1100-HS

Ruby Nozzle A019

Recommended Hotend:Dragon series / Dragonfly series

Material Properties

PropertyTesting methodTypical value
DensityISO 11831.10g/cm³
Glass transition temperatureISO 11357101℃
Melt index250℃,2.16kg4g/10min
Vicat softening temperatureISO 306106℃
Determination of temperature

ISO 75:Method A

ISO 75:Method B

92℃ (1.8MPa)

96℃ (0.45MPa)

Tensile breaking strengthISO 52739.28±0.93MPa
Elongation at break2.43±0.20%
Young’s Modulus2826±56MPa
Tensile breaking strengthISO 52719.02±0.9MPa
Young’s Modulus2331±130MPa
Elongation at break1.28±0.32%
Bending strengthISO 17866.21±0.42MPa
Bending Modulus2681±24.99MPa
Charpy impact strengthISO 1798.17±0.66KJ/㎡

Recommended printing conditions

Nozzle Temperature250-270℃
Recommended Nozzle Diameter≥0.4 mm
Recommended build surface treatmentGlass/PEI Film or PC Film
Build plate temperature100-110℃
Raft separation distance0.18-0.2 mm
Cooling fan speed0%-20%
Print speed30-90 mm/s
Retraction distance2-5 mm
Retraction speed1800-3600 mm/min
Recommended support materialaeSupport™ S-Multi Quick-Remove Support

Other sugggestions:

Compared with PLA, PETG and other materials, ABS materials need a higher chamber temperature to help release the residual stress during the printing process. Please keep the printer chamber closed during the printing process. It can effectively avoid printed parts from warping and cracking. If the device has a heated chamber, it is recommended to set the temperature of heated chamber between 60-80°C.

If the ABS-GF filament has been unpacked for a long time and the printing quality starts to degrade during the printing process, please dry the filament at 70-80°C for 4-6 hours before printing.

Although aeWorthy™ABS-GF has much less odor compared with similar products, it is still recommended to place the printer in a well-ventilated area during printing.

Packing List